Category: Uncategorized

  • Why UltraSense’s Flammable Gas Sensor Has Become the Most Widely Deployed Device in Their Portfolio

    Why UltraSense’s Flammable Gas Sensor Has Become the Most Widely Deployed Device in Their Portfolio

    Flammable gas detection remains one of the most persistent challenges in industrial, infrastructure, and critical-facility environments. Gas accumulation events are often invisible, may develop rapidly, and can precede ignition or equipment damage by mere minutes. As a result, detection systems must operate continuously, reliably, and with minimal reliance on human intervention.

    Among the UltraSense sensor portfolio, the flammable gas sensor (ULT-R-Gas-Flammable) has seen the broadest adoption—largely because its design aligns closely with the operational realities of modern facilities: continuous operation, system integration, and early, actionable detection.

    ULT-R-Gas-Flammable

    Broad Gas Coverage Using a Single Detection Platform

    A primary driver of adoption is the sensor’s ability to detect and measure a wide range of flammable gases using a single device. It provides measurement across 0–100% of the Lower Explosive Limit (LEL) for multiple gas types, including hydrogen, methane, propane, butane, and pentane; further, it is also responsive to a broader spectrum of combustible hydrocarbons and selected volatile organic compounds (VOCs). These include gasoline-range vapors, aromatic hydrocarbons such as BTEX compounds, and alcohol- and solvent-based vapors commonly encountered in industrial, infrastructure, and energy-related environments.

    The capability for multi-gas / compound detection is particularly valuable in environments where gas composition may vary. Gas emissions are affected by factors including operating state, failure mode, or equipment type—e.g., battery energy-storage systems (BESS), electrical switchgear rooms, data centers, telecommunications facilities, fuel-handling areas, and enclosed industrial process spaces.

    By consolidating detection requirements into a single sensor platform, operators reduce system complexity and maintain consistent coverage across diverse flammable gas hazards.

    Spectrometer-Based Detection & Response Performance

    The UltraSense sensor employs a spectrometer-based detection method, rather than catalytic bead or electrochemical technologies. This detection approach avoids the consumable and reactive elements used in catalytic bead and electrochemical sensors, resulting in more stable long-term performance, reduced drift, and lower maintenance requirements in safety-critical environments. From an operational standpoint, this provides stable performance across a wide range of temperatures and humidity levels.

    The sensor achieves a T90 of less than 30 seconds, meaning it reaches 90% of its final stabilized reading within that timeframe following a step change in gas concentration. This response metric is particularly relevant in safety applications, as earlier detection directly expands the window for effective intervention.

    The above-described characteristics support predictable performance in continuous-duty and remote installations where routine calibration or frequent servicing may be impractical.

    Engineered for Industrial & Infrastructure Environments

    Flammable gas hazards typically exist in environments that are electrically noisy, thermally variable, and mechanically demanding. The sensor is designed accordingly, featuring an industrial-grade steel enclosure, extended operating temperature capability down to –40 °C, high humidity tolerance, and resistance to vibration and transient electrical disturbances.

    As a result, the sensor is routinely deployed in infrastructure, energy, and industrial settings rather than being confined to controlled indoor or laboratory environments where it also equally adept.

    Regulatory Acceptance & International Certification Profile

    Regulatory acceptance plays a decisive role in sensor selection for safety-critical applications. The UltraSense flammable gas sensor is Electrical Testing Laboratory (ETL) listed to UL 2075, a widely recognized standard governing the safety and performance of gas and vapor detectors used in non-hazardous but safety-critical environments.

    In addition, the sensor has been evaluated against a range of international standards addressing electromagnetic compatibility (EMC), electrical safety, and environmental robustness. These include EN 50270 for gas detector EMC performance; EN 61010 for electrical safety of measurement and control equipment; applicable IEC 61000-4 series immunity tests covering surge, transient, and conducted RF disturbances; and IEC 60068 environmental testing for vibration and damp-heat exposure.

    This certification and testing profile supports deployment across multiple jurisdictions and simplifies approval with authorities having jurisdiction (AHJs), particularly for globally distributed facilities.

    Alerts as the Basis for Timely & Proportionate Response

    Beyond detection accuracy, the sensor’s value lies in its ability to generate early, actionable alerts. In many flammable gas incidents, outcomes are determined less by detection itself than by how quickly abnormal conditions are communicated and acted upon.

    The sensor supports multiple alerting mechanisms, including relay outputs and digital communication via Modbus RTU over RS-485, enabling integration with supervisory and control systems. Alerts can be structured around graduated thresholds, supporting proportionate response strategies rather than single, binary alarm states.

    Integration with SCADA & Operations Management Systems

    The sensor’s communication architecture enables direct integration with SCADA (supervised control and data acquisition) systems, building management systems (BMS), energy management platforms, and other operations management environments.

    Within these systems, gas concentration data can be visualized alongside electrical, thermal, and environmental indicators; logged for trending and diagnostics; and used as an input to automated logic or operator decision-making. This integration allows operators to correlate gas events with equipment states, ventilation performance, and operational changes, supporting more informed responses and post-event analysis.

    Enabling Automated & Manual Intervention

    In facilities where rapid response is required, sensor alerts may initiate automated actions such as equipment isolation, ventilation activation, or escalation to fire detection and suppression systems such as Stat-X® condensed aerosol generators. By minimizing false alarms and unstable readings, the sensor supports sustained use of automation—ensuring that protective actions remain enabled rather than being gradually bypassed, a condition that can occur when frequent nuisance alarms or unreliable inputs lead operators to disable or override automated safety functions perceived as disruptive rather than protective.

    In staffed environments, alerts also support informed manual intervention by providing objective, real-time data that enables operators to verify conditions, implement procedural controls, prioritize maintenance actions, or determine whether evacuation or operational shutdown is warranted.

    Role Within a Layered Sensor Architecture

    Flammable gas detection is most effective when deployed as part of a layered sensing strategy. In practice, gas sensors are often combined with thermal sensors, smoke or particulate detection, environmental monitoring, and electrical condition monitoring.

    Within such architectures, the flammable gas sensor serves as the primary chemical indicator layer, bridging early degradation signals and later-stage fire detection. Correlating multiple sensor inputs improves alarm confidence and supports graduated response strategies while reducing false or nuisance alarms.

    Longevity & Lifecycle Considerations

    With a typical service life of up to ten years and no routine calibration requirements under normal operating conditions, the sensor aligns well with long-term infrastructure planning horizons. This contributes to predictable lifecycle performance and reduced operational disruption in large-scale or multi-site deployments.

    From an asset management perspective, longer service intervals and stable measurement behavior also simplify maintenance planning, spare parts management, and lifecycle cost modeling. In facilities where sensors are deployed in hard-to-access or continuously operating environments, these characteristics reduce the need for intrusive maintenance activities while supporting consistent system availability over time.

    Conclusion

    For operators managing complex, safety-critical environments, the UltraSense flammable gas sensor offers a balance of broad detection capability, integration flexibility, and long-term stability. That balance has driven its widespread deployment across global infrastructure, energy, and industrial facilities. When deployed as part of a broader installation of UltraSense sensors—spanning gas, thermal, environmental, and condition monitoring—the flammable gas sensor contributes to a more comprehensive, system-level approach to early detection, operational awareness, and risk mitigation.

  • Battery Energy Storage System (BESS) Failure Causes—Probably Not What You Think

    Battery Energy Storage System (BESS) Failure Causes—Probably Not What You Think

    Note to the reader: This article is intended solely for educational and informational purposes to discuss findings from the Electric Power Research Institute study on BESS failures. It does not, in any way—whether expressed, implied, or inferred—constitute an endorsement, approval, or sponsorship by EPRI of UltraSense™ or Stat-X® products.

    Introduction

    The Electric Power Research Institute (EPRI) is the world’s leading authority on tracking and analyzing incidents in BESSs and with their BESS Incident Database has established “the most comprehensive compilation of stationary BESS incidents.”

    In their 2024 white paper, Insights from EPRI’s Battery Energy Storage Systems (BESS) Failure Incident Database,  Analysis of Failure Root Cause, EPRI provided some highly interesting revelations into the rate of BESS failures, and more importantly, into the root causes of BESS failures.

    Currently, EPRI is the only publicly available database providing hard data on BESS incidents based on their root cause of failure. Determining the root cause of failure in BESS incidents is incredibly important to future BESS installations and for the protection of existing BESSs. Without this information, BESS installers, operators, and safety professionals are left guessing where to focus their efforts. Until the release of EPRI’s white paper, most had been looking in the wrong direction.

    EPRI Study Methodology

    It is important to first understand the parameters EPRI used in releasing their findings. The foundational component is their global BESS incident database which was established in 2021 after several high-profile BESS incidents in South Korea, as well as one in Arizona (USA) which injured several firefighters.

    Because BESSs are so widespread with myriad uses, EPRI concentrates only on events with commercial, industrial, or utility-grade BESS installations. To further refine their focus, EPRI defines a failure incident as an event that increases safety risk due to a BESS system or component malfunction, rather than from external factors such as a wildfires, storms, etc.

    Failure Classification

    BESS incidents can occur for many reasons. To better understand the data and draw accurate conclusions, EPRI used a two-pronged approach that divided the causes into (1) root cause and (2) failed element.

    Root Cause

    • Design
      A failure caused by flaws in the design, layout, or function of system components or the energy storage system (ESS) as a whole, including lack of safeguards against foreseeable misuse
    • Manufacturing
      A failure caused by a manufacturing defect in an ESS component, such as foreign material in cells, improper tolerances, or missing / misassembled parts
    • Integration, Assembly & Construction
      A failure resulting from poor integration, incompatible components, incorrect installation, or inadequate commissioning of the ESS
    • Operation
      A failure caused by system operation exceeding design limits—such as voltage, temperature, or state of charge—due to improper charging, discharging, resting behavior, or faulty sensing of critical parameters

    Failed Element

    • Cell / Module
      A failure originating in a lithium-ion cell or module—the core unit of the BESS—typically caused by internal short circuits leading to thermal runaway. Learn more here.
    • Controls
      A failure in the sensing, logic, or communication systems that manage ESS operation, including the battery management system (BMS), energy management system, and plant controllers; causes include system incompatibility, installation errors, defects, or improper operating limits
    • Balance of System (BOS)
      Failures involving the control or communication systems that govern ESS operation—such as the BMS, energy management, or plant controllers—often result from configuration errors, hardware faults, or improper operating limits.

    In their study, EPRI noted that some incidents had more than one root cause or failed element. In these cases, they were given more than one classification. An example they cited occurred in 2022 at the Elkhorn battery facility in Moss Landing, California (USA).

    In the aforementioned incident, rainwater ingress led to a short circuit in a battery cell which resulted in a thermal runaway. The rainwater ingress point was created and unnoticed during installation of another component. Compounding the problem, the loss-of-insulation alarm was not properly escalated until a fire occurred two days later.

    EPRI classified this event as involving both a construction-related issue within the BOS and a design-related issue in the control system.

    Results of the Study

    BESS Failure Rates

    The first interesting fact EPRI noted is that BESSs are becoming far safer. From 2018 to 2023, there has been an astonishing 97% decrease in the rate of utility-grade BESS failures. This is attributed to the maturity of the battery industry and R&D efforts to understand why BESS incidents were occurring and what measures could be taken to prevent or mitigate them.

    Since 2018, the number of BESS incidents has remained fairly static despite an enormous increase in the cumulative deployment of BESS installations.

    Root Cause Analysis

    Insufficient information from which to establish a root cause of failure is a common factor and impediment. For example, due to insufficient information, none of the nine incidents from 2011 to 2017 could be classified. However, from 2018 to 2023 twenty-six incidents were classified allowing statistically significant inferences to be made.

    The root causes of the aforementioned twenty-six BESS failures were as follows:

    • Integration, Assembly & Construction – Ten incidents / 36%
    • Operation – Eight incidents / 29%
    • Design – Six incidents / 21%
    • Manufacturing – Four incidents / 14%

    Note that two incidents had more than one root cause such as was mentioned previously.

    As “Integration, Assembly & Construction” was the leading root cause, the study revealed another interesting factor—most BESS failures, i.e., 72%—occur within the first two years of operation, including during or immediately following commissioning.

    The urban legend surrounding BESS failures is that manufacturing defects in lithium-ion batteries is the typical root cause of BESS incidents. The results of the study—with “Manufacturing” being solidly in last place of the root causes—clearly did not bear this out. This will be discussed further in the next section.

    Failed Element

    The failed element analysis also provided clear insight as to which component of a BESS was responsible for the incident. The results, which were surprising to many, are as follows:

    • Controls – Thirteen incidents / 46%
    • Balance of System (BOS) – Twelve incidents / 43%
    • Cells / Modules – Three incidents / 11%

    This information was stunning, as the accepted wisdom in BESS incidents is that cell failure as a root cause leads to thermal runaway. In fact, 89% of BESS incidents do not stem from battery failure. It should be noted however that battery failure / thermal runaway did occur in some incidents secondarily due to faults in the controls or BOS category. This will be explained in more detail in the following section.

    Cross-Referenced Analysis

    EPRI’s analysis of battery energy storage incidents examined both the initiating cause of each failure and the system component where it originated. When these two dimensions were compared, clear patterns emerged across the data set.

    The largest share of incidents involved issues related to construction and assembly of BOS components—such as cabling, cooling, or enclosure systems—where compatibility and workmanship were contributing factors. Events of this kind typically occur during installation or early operation, underscoring the importance of disciplined commissioning and verification procedures. Industry experience, including the 2021 Victoria Big Battery event in Australia, has shown that even minor assembly defects, such as coolant or water ingress, can escalate into significant failures.

    A second recurring theme across incident data relates to operational control systems. Several early-stage BESS events, particularly in Asia, highlighted the challenges of maintaining proper limits for voltage, temperature, and state of charge. These findings demonstrate that many failures arise from system management or operational boundaries rather than intrinsic cell defects.

    Beyond these categories, other reviews of public BESS data sets and field reports have noted that water intrusion remains a frequent contributor to electrical isolation loss and secondary thermal events. In some cases, this has been linked to leaks or design flaws in auxiliary systems, including fire-protection or HVAC components. Such examples illustrate the value of rigorous enclosure design, environmental sealing, and monitoring to reduce the likelihood of water-related faults.

    EPRI Conclusion & Recommendations

    The first notable conclusion in the EPRI study was that lithium-ion battery failure is not the prevailing cause of BESS incidents. In 89% of the cases, it is controls or BOS. This means that BESS operators and fire protection professionals need to rethink their approach to safety.

    Many of EPRI’s recommendations and mitigations focus on due diligence prior to installation and commissioning such as:

    • Following relevant codes and standards
    • Site-specific risk assessments
    • Selecting qualified suppliers
    • Strict specifications and quality assurance

    To protect the BESS during commissioning and operation, the focus turns to having a better understanding of what is going on inside of the BESS. EPRI highlighted the role of advanced sensing, monitoring, and data analytics in improving early detection of design or operational issues and in strengthening the predictive capabilities of battery management systems.

    While EPRI did not evaluate suppression methods, industry experience has shown that water-based fire systems can contribute to water ingress which has been shown to be a known factor in some BESS incidents.

    The Solution

    While EPRI’s findings do not reference or evaluate any specific products, they underscore the importance of sensing, monitoring, and suppression technologies—areas where commercially available solutions, such as UltraSense™ industrial sensors and Stat-X® fire suppression systems may play a role.

    These insights reinforce the practical reality that, despite improving safety trends, BESS incidents continue to pose serious challenges. Rapid escalation, difficult suppression, and extensive post-incident losses demonstrate why comprehensive protection strategies remain indispensable.

    Ideal protection for BESSs takes a three-pronged approach of:

    • Prevention
    • Detection
    • Suppression

    Prevention

    Many BESS failures are preceded by subtle environmental changes. Excessive heat or humidity, accumulating dust, vibration, or corrosive air quality can all be early indicators of impending problems. UltraSense’s advanced sensor technology monitors all of these conditions and provides the data needed to both optimize system performance and prevent failures.

    An effective prevention sensor suite addresses specific failure precursors:

    • High temperature—can lead to overheating or thermal runaway
    • High humidity—produces condensation and insulation breakdown
    • Dust and/or corrosive environment—undermines electrical insulation and cooling
    • Vibration—can cause mechanical failure

    By continuously monitoring these factors, operators can correct issues before they trigger failures.

    Detection

    Even though the preventative approach is most desirable, there are scenarios where failure may occur absent any of the conditions monitored by prevention sensors. In this case, early warning of developing issues is key to allowing intervention before conditions escalate.

    Again, UltraSense sensors and monitoring are the answer. An effective detection sensor array includes:

    • Water ingress which can cause short circuits leading to failure
    • Heat detection for developing hot spots on equipment or a rapid rise in enclosure temperature
    • IR thermography to detect even the smallest increase in equipment temperature
    • Volatile organic compound / hydrogen detectors (VOC/H2) which detect minute amounts of these gases produced when batteries first begin to fail, or insulation or other components significantly overheat
    • Flammable gas sensors detect the byproducts of thermal runaway
    • Smoke detectors (aspirating and photoelectric) provide early warning when smoke is produced during thermal runaway or a fire develops from another source

    Depending upon the configuration, detection sensors can trigger alerts to operators and/or automatically commence shutdown, cooling, or other interventions.

    Suppression

    While effective prevention and early detection sensors will mitigate most BESS incidents, operators should always prepare for the worst-case scenario of a fire. Rapid suppression of a developing fire can limit damage and downtime and exponentially increase the safety of those responding to the incident.

    Industry analyses, including data referenced by EPRI, have identified water intrusion as a contributing factor in several BESS incidents. Clean agent systems are expensive, in addition to being under intense scrutiny for health and environmental hazards. On the other hand, dry chemicals, while inexpensive and effective, are difficult to clean up and damaging to sensitive electrical components.

    Condensed Aerosol Generator

    As a result, condensed aerosol systems such as Stat-X are quickly becoming the first choice for BESS fire suppression. Stat-X has none of the downsides of the agents above, while also being more effective and easier / cheaper to install. Working in a total-flooding manner, Stat-X quickly extinguishes fire and remains suspended to provide reflash protection. It has been tested and proven effective on lithium-ion rack fires.

    Complementary Sensing & Fire Suppression Technologies

    Supplied from a single source, UltraSense and Stat-X technologies supply complementary protection with each enhancing the other’s effectiveness across sensing, detection, and suppression. This delivers an intelligent, cohesive, and coordinated approach to BESS safety.

    UltraSense offers a comprehensive suite of over 80 sensor types spanning thermal, environmental, electrical, and mechanical monitoring. This modular platform is specifically designed (and safety-certified) for BESSs, with the distinction of being the only listed, open & modular sensor platform focused on mitigating fire hazards in ESS / BESS deployments.

    Many UltraSense sensors are multi-functional—combining multiple sensing modalities in one unit—and can be daisy-chained for wide coverage with minimal wiring; this makes them well-suited to dense battery enclosures. The sensors are built for industrial durability and accuracy (e.g., ISO17025-calibrated temperature sensors), ensuring reliable performance in harsh conditions.

    When paired with Stat-X, this early warning capability becomes a full-spectrum protection strategy. Upon detection of fire conditions, UltraSense sensors can automatically activate the Stat-X fire suppression system. The enclosure is rapidly flooded with a fire-suppressing aerosol agent, stopping flame propagation and interrupting combustion at the chemical level.

    Further, since no piping or banks of agent are required, Stat-X is inexpensive to install and ideal for retrofitting. Being virtually maintenance free and having a 15-year service life, its lifecycle cost is exponentially lower than other systems. Stat-X has zero environmental or health risks.

    Conclusion

    EPRI’s study found that most BESS incidents stem from control systems or balance-of-system components—not battery cells. Its findings highlight the need for stronger design, commissioning, and monitoring practices to detect and prevent faults early and are intended to guide general industry practice.

    Across the energy-storage sector, early detection and rapid suppression remain critical to minimizing fire risk and downtime. Complementary sensing and suppression technologies can provide a coordinated defense by identifying abnormal conditions, triggering response actions, and limiting fire propagation. UltraSense sensors and Stat-X condensed-aerosol systems exemplify this layered approach; however, they are referenced here solely for illustrative purposes and are not endorsed or validated by EPRI.

  • Six Reasons to Use UltraSense™ Sensors

    Six Reasons to Use UltraSense™ Sensors

    In mission-critical environments—e.g., data centers, battery energy storage systems, and power-handling equipment—the best form of fire protection does not focus on fire suppression, but rather on fire prevention and detection. UltraSense™ sensors monitor for a variety of conditions which provide operators with early detection of anomalies, allowing them to intervene before a fire even starts. Further, they provide near-instant detection in the event of an actual fire.

    Following are six compelling reasons to deploy UltraSense sensors:

    1. Comprehensive Environmental Monitoring in One Unified Platform

    High ambient temperature, extreme humidity, or excessive dust can overheat equipment or cause malfunctions that lead to electrical faults and fires. UltraSense sensors provide atmospheric monitoring that covers all of these conditions. By understanding the environment where equipment is operating, users can take early action to prevent problems before they occur.

    UltraSense sensors deliver real-time data / alerts as to the following conditions:

    • Temperature
    • Humidity
    • Particulates in the air
    • Water ingress

    With this broad range, UltraSense enables centralized monitoring of environmental conditions. The need for piecing together multiple systems—which can lead to fragmented visibility and increased integration costs—is eliminated.

    2. Tailored for Harsh Environments

    Unlike many commercial-grade sensors which are designed for office settings, UltraSense sensors are ruggedly constructed for real-world applications.

    Many models feature:

    • Industrial temperature ranges (e.g., -40°F to +185°F)
    • Dustproof and waterproof enclosures
    • Electromagnetic shielding to reduce interference
    • Robust mounting options for equipment racks, ceilings, or walls

    For harsh and sensitive environments alike, UltraSense’s hardware durability is crucial. These sensors continue operating in hot, wet, corrosive, or dirty environments where lesser systems would fail.

    3. Efficient Deployment & Scalable Architecture

    UltraSense’s platform is modular and scalable, making it ideal for projects of all sizes. Whether monitoring one electrical cabinet or multiple sites, the architecture supports gradual, efficient rollout with features such as:

    • Modular base units which support multiple sensors
    • Wireless and wired sensor options for flexible deployments
    • Daisy-chaining support that extends coverage without excess cabling
    • Edge-capable—meaning they process data locally, unlike traditional sensors that simply transmit data to a centralized server or cloud

    The above features enable companies to expand sensor coverage without overhauling existing infrastructure. This reduces the total cost of ownership which is particularly important in budget-conscious sectors.

    4. Early Thermal Anomaly Detection

    UltraSense’s thermal sensors continuously monitor the heat conditions of equipment surfaces and operating environment. Even slight temperature increases can trigger alerts, enabling proactive inspection before a fault becomes hazardous.

    UltraSense sensors provide:

    • Dedicated temperature sensors deployed across critical areas to detect minute increases in room or surface temperature which inform operations and maintenance personnel
    • High-resolution IR thermography which scans equipment surfaces in real-time, visually mapping heat distribution to detect abnormal thermal patterns and hot-spots
    • Integration with edge-capable controllers which automatically analyze thermal data on-site and issue alerts when a preset temperature threshold is breached

    By combining continuous ambient monitoring with real-time IR hot-spot detection and smart edge-triggered alerts, UltraSense provides an early-warning framework to identify potential fire sources before it begins.

    5. Off-Gas Monitoring for Quick Detection

    Many issues that lead to fire begin with off-gassing vapors well before visible fire has formed. UltraSense provides VOC/H2 (volatile organic compound and hydrogen) gas sensors which detect abnormal emissions from batteries, electronics, or machinery, alerting operators before smoke activates traditional alarms.

    UltraSense gas monitors:

    • Can detect minute emissions of VOCs released from overheating components
    • Detect the presence of hydrogen—which is a strong indicator of potential fire risk—in battery energy storage systems
    • Provide fast response times (<30 seconds) and high accuracy (±3% LEL)

    By identifying early-stage chemical emissions with precision and speed, UltraSense gas monitors serve as a critical first line of defense against fire, enabling proactive intervention before conditions escalate into visible flames or system failures.

    6. Virtually Instant Fire Detection

    If conditions deteriorate before preventive measures can be taken, UltraSense also provides aspirating and photoelectric smoke sensors. These sensors complement thermal and gas monitoring in a layered defense.

    With a full suite of UltraSense sensors, users can become almost instantly aware of fire through:

    • Smoke detection
    • Heat detection
    • Gas detection
    • IR thermography

    Using UltraSense’s multi-tiered setup—spanning smoke, heat, gas, and IR thermography—operators gain near-instant awareness of fire conditions allowing prompt intervention before conditions escalate.

    Conclusion

    UltraSense sensors create a proactive shield against fire by providing early warnings at every stage, ranging from heat anomalies to water ingress and smoke. Their layered, edge-based, and integrated approach ensures that instead of relying on fire suppression, fires are prevented before they begin. In a world where downtime is costly and environmental risks are rising, smart monitoring is mission-critical. UltraSense sensors offer the breadth, intelligence, and resilience needed to stay ahead of problems.

  • UltraSense™ for Critical Infrastructure Detection System for Data Centers

    UltraSense™ for Critical Infrastructure Detection System for Data Centers

    Overview

    Data centers—including edge, collocated, hyperscale, intermediate distribution frame, and server rooms—all represent vital infrastructure to business and industry. The areas where the physical servers, networking, and other IT gear reside is referred to as the “white space.”

    A failure in this mission-critical infrastructure can lead to costly downtime, lost productivity, and possibly a fire or explosion. If the data center is a cloud data storage provider, they can face additional liability in the form of breach of contract, downtime compensation claims, lawsuits, and regulatory actions and/or fines. When it comes to protecting data centers, there is simply no room for error.

    Data centers are complex installations which require all operating parameters to be carefully managed according to strict specifications. The intent is to tightly control the operating environment and prevent problems from occurring. Because data centers are voracious consumers of electricity, the risk of an electrical fire must always be considered and planned for as well.

    Fireaway is now offering a total fire protection solution for operators through their new line of UltraSense™ Clean Energy sensors. Fireaway produces Stat-X®, a condensed aerosol fire suppression agent that is proven effective on fire incidents. When paired with their suite of UltraSense sensors, Fireaway offers operators a complete protection package that includes prevention, detection, and suppression.

    Critical Infrastructure Monitoring Parameters – Prevention

    Before delving into the protection features provided by UltraSense sensors, it is important to understand the environmental monitoring standards. Because of the heat produced by equipment, the obvious primary consideration is cooling and humidity control. The central standards used in the data-center world are the recommendations by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). These parameters are all focused at the prevention phase of protection.

    Following are ASHRAE environmental monitoring recommendations and the downsides of not properly performing this monitoring:

    Ambient Room Humidity

    Monitoring room humidity is often overlooked but viewed as equally important as monitoring room temperature. The target relative humidity is between 40% and 60%.
    If the room is too dry, there is a risk of electrostatic discharge (ESD) which can damage sensitive electronic components, corrupt data, and disrupt operations. If the room is too humid, corrosion that begins slowly damaging equipment becomes a risk.

    If corrosion is left unchecked, it can create electrical shorts which can cause a fire. When humidity is sufficiently high enough for condensation to form, this also can rapidly generate short circuits, increasing the risk of fire or equipment damage.

    Ambient Room Temperature

    The room temperature where servers are located should be maintained between 18°-27°C / 64°-80°F. When temperatures exceed this recommended operating range, errors can occur at the CPU (central processing unit) level, and some systems have safeguards built in to automatically shut down the equipment to protect it against high-heat conditions. Additionally, heat stresses other ancillary equipment such as fan systems which increases maintenance and replacement costs.

    High room temperature also increases the odds for other types of electrical faults that can cause a fire. Lithium-ion batteries in uninterruptible power supplies (UPS) are particularly susceptible to failure in high-temperature environments.

    Rack-Level Monitoring

    A common mistake that data center operators make is to only monitor conditions at the room level and not at the rack level where the servers are located. This is because, should a heat problem occur, the air conditioners in the room will attempt to compensate and only when they fail will the problem be detected; this may be too late to prevent damage, downtime, and/or data loss.

    For maximum protection, ASHRAE recommends six temperature sensors per rack. Further, they recommend mounting them at the top, middle, and bottom of the rack and at the front and back ends of the rack. This is to ensure that cooling is permeating the entirety of the rack.

    Air Conditioning Monitoring

    Because air conditioning is essential for data centers, it is crucial to verify that it operates properly at all times. Therefore, temperature and humidity sensors should be positioned adjacent to air conditioning outlets. This provides operators with almost immediate notification should there be a problem.

    Water Leaks / Flooding

    This is another area of environmental monitoring that is often overlooked because of the perceived low likelihood of occurrence. However, the consequences of water exposure can create manifold problems within a data center. Even if the water does not physically contact the equipment, its presence greatly increases the likelihood of corrosion on sensitive electrical components.

    If water actually reaches critical IT infrastructure, data loss or corruption most likely will occur, leading to significant service outages and financial losses. Additionally, contact with water can damage raised floors, cabling, and power systems, resulting in extensive downtime and expensive repairs.

    The main sources of water in a server room and recommended sensor placement are as follows:

    Water SourceSensor Placement
    Leaking air conditioning systemsUnder each A/C unit
    Leaks of water pipes running through server roomsUnder the raised floors
    Traditional flooding
    Water leaks in floors or roof above the roomAround the perimeter of the room approximately 3ft/50cm from the outer walls and under the raised floor

    In addition to the damage water can do to IT componentry, water exposure can lead to short circuits, which can spark and potentially start a fire. Even a small water leak in a UPS or power distribution unit can create a severe hazard.

    Dust / Particulates

    In addition to providing cooling, many air conditioning systems also employ HEPA (high-efficiency particulate air) filters or other air filtration systems to remove dust and other particulates from the air.

    Excessive dust or particulates in the air cause problems for data centers because dust is often conductive, especially in humid conditions. It can settle on circuitry and connections, creating short circuits or arcing events that can lead to component failure. Dust also accelerates wear on moving parts—e.g., fans—and can lead to premature equipment failure and costly maintenance.

    Therefore ASHRAE suggests that airborne contaminants should be kept below certain levels, typically below ISO Class 8 (ISO 14644-1), to reduce the risk of particulate damage. The only way to quantify the levels of particulates within a server room is to place a particulate sensor in the room.

    From a fire hazard point of view, dust can act as an insulator on heat-producing components, trapping heat and causing localized overheating, increasing the risk of fire. The short circuits and arcing mentioned above are also competent ignition sources.

    AC (Alternating Current) Power Failure

    While not an ASHRAE environmental standard, almost every server room is equipped with a UPS that activates to supply power whenever the main source of power is interrupted. Large-scale data centers will likely have an alerting system that informs the operators of this occurrence. However, smaller server rooms may not be so equipped.

    It is vital to know when power has failed so that immediate action can be taken to preserve data. Additionally, backup cooling systems can be brought online quickly to manage the environmental stability of the IT infrastructure and reduce the risk of fire. Employing a simple AC power failure sensor can provide immediate alerting to operators so that appropriate action can be taken.

    For information about the fire risk caused by thermal runaway in lithium-ion battery uninterruptible power supplies, please see our article Ultrasense Clean Energy™ Detection System for Battery Energy Storage Systems.

    The UltraSense™ Critical Infrastructure Solution

    The key to preventing catastrophic failures in critical infrastructure equipment is immediate detection of problems that allows operators time to take corrective action. UltraSense’s suite of sensors provide operators with early warning that can prevent equipment failure from occurring or enables the ability to detect it at its incipient stage to allow other mitigation measures.

    Prevention

    Because of the incredible importance placed on data centers and server rooms, prevention is of signal importance. By monitoring the environment inside of a data center, operators can take action to prevent conditions from developing that can lead to downtime, data loss, or in the worst case, a fire.

    With Ultrasense sensors, operators can monitor:

    • Room temperature
    • Humidity
    • Rack temperature
    • Air conditioning temperature and humidity
    • Particulates in the air
    • Water ingress
    • AC power failure

    When IT equipment is exposed to high temperatures, high humidity, water ingress, or excessively dusty environments, it is more prone to failure. UltraSense sensors can monitor all of these parameters, or any subset of them, providing operators with the opportunity to mitigate the issue and prevent a damaging incident.

    Detection

    In the event that a sudden electrical fault creates a fire or if mitigation measures for environmental anomalies are ineffective at preventing a fire, UltraSense provides a smoke detector which can be installed inside of the server rooms.

    Ultrasense Sensor Features

    Ultrasense sensors are ruggedly built and are U.L. listed. The plug-and-play units can be used as standalone sensors or daisy chained for broad coverage.

    Users of Ultrasense sensors have a choice of how they receive data from the units. Data can be accessed over an internet connection or using open protocols and business management / network systems via one of these options:

    • SNMP (Simple Network Management Protocol): A method often used in networking to retrieve data from devices.
    • Modbus TCP: Another common protocol that allows data exchange over IP networks, typically used in industrial settings.
    • MQTT (Message Queuing Telemetry Transport): A protocol designed for IoT (Internet of Things) that enables the sensor to send data directly to an IoT cloud service.

    UltraSense sensors can help operators comply with NFPA 70B, Standard for Electrical Equipment Maintenance, which requires both continuous thermal monitoring and operating environment monitoring for electrical equipment.

    The Stat-X Solution

    To ensure the best safety posture for data centers and IT installations, operators should always plan for the worst-case scenario—a fire in the server room. Stat-X is tested and proven to be highly effective in electrical equipment and IT infrastructure fire protection.

    Stat-X units can be activated by a fire detection system or thermally activated when exposed to a preset temperature. Once activated, the condensed aerosol fills the container, suppressing the fire. Further, it remains suspended for several minutes providing reflash protection.

    Stat-X has zero ozone-depletion potential, zero global-warming potential, and zero atmospheric life. This means that users can be certain that they will never be faced with costly system replacement issues which are becoming increasingly common with other fire suppression agents.

    Conclusion

    While fires in data centers are fortunately rare, those that have occurred have had disastrous consequences. Fireaway, with its line of UltraSense sensors and Stat-X fire suppression systems, offers a complete protection package that provides the highest level of safety available from any single supplier.

    Contact Fireaway for more information on how you can provide the best level of protection for your critical infrastructure.

  • UltraSense™ for Power Generation Detection System for Power-Handling Equipment

    UltraSense™ for Power Generation Detection System for Power-Handling Equipment

    Overview

    Power-handling equipment—think switchgears, transformers, electrical panels, uninterruptable power supplies—are all vital infrastructure to business and industry. In the data-center world, this backend equipment resides in what is known as the “gray space.”

    A failure in this mission-critical infrastructure can lead to costly downtime, lost productivity, and possibly a fire or explosion. The problem with electrical equipment is that it often operates for years or even decades with no hint of a problem until it suddenly fails catastrophically without warning.

    To avoid this, companies have traditionally been left with only one choice: time-consuming manual inspections to check connections, examine the condition of the equipment, and using a handheld infrared (IR) gun to look for hotspots. While this plan has merit, it depends on the skill of the inspector and organization’s commitment to performing the inspections.

    Fireaway is now offering a total fire protection solution for operators through their new line of Ultrasense™ Power Generation sensors. Fireaway produces Stat-X®, a condensed aerosol fire suppression agent that is proven effective on electrical equipment fire incidents. When paired with their suite of UltraSense sensors, Fireaway’s Stat-X fire suppression system offers operators a complete protection package that includes prevention, detection, and suppression.

    Electrical Equipment Failure

    Before delving into the protection features provided by UltraSense sensors, it is important to understand how electrical equipment such as transformers, switchgears, and electrical panels fail. Once the failure mode initiates, if left unchecked, it can lead to a self-propagating, chain-reaction-like event which can result in a devastating fire or explosion. For brevity, this will be referred to as the “failure chain reaction” hereafter.

    Environmental Factors

    Dust and condensation from humidity or water ingress can accumulate in electrical equipment, causing partial shorts, arcing, and increased resistance. These conditions can generate heat, especially under high voltage, and lead to localized hotspots that initiate a failure chain reaction.

    Aging and Lack of Maintenance

    Over time, components in electrical equipment can degrade due to mechanical wear, environmental exposure, and repeated heating and cooling cycles. Without regular maintenance, these aging parts are more susceptible to failure, which can lead to overheating and, ultimately, a failure chain reaction.

    Poor Ventilation or Cooling

    Electrical equipment enclosures that lack proper ventilation or cooling may struggle to dissipate the heat generated by normal or abnormal operation. If the heat buildup inside the enclosure exceeds the thermal tolerance of its components, it can trigger a failure chain reaction as parts begin to overheat and fail sequentially.

    Manufacturing Defects

    Improper insulation, defective components, inadequate clearances, and improper assembly can all lead to internal arcing—when an electrical arc forms inside of electrical equipment, generating intense localized heat. Arcing can ignite surrounding materials, causing rapid temperature increases and leading to a chain reaction of failure in other components.

    Insulation Degradation

    The insulation material in electrical equipment can degrade over time, especially if exposed to high temperatures, moisture, or other environmental factors. Damaged or degraded insulation can lead to partial discharges, arcing, or short circuits, all of which generate heat. If this heat is not dissipated, it can cause nearby components to overheat and fail, contributing to a failure chain reaction.

    Overcurrent Conditions

    If electrical equipment experiences excessive current, such as from a fault condition or overload, it can generate significant heat in conductors and contacts. This heat buildup can lead to the breakdown of insulation and other protective materials, escalating to a failure chain reaction if not managed.

    Loose Connections or Faulty Contacts

    Loose connections or degraded contact surfaces within electrical equipment create areas of high electrical resistance; this generates heat when current flows through them. Over time, this heating effect can worsen, especially under high-load conditions, causing the components to overheat and potentially leading to failure chain reaction.

    Failure Chain Reaction in Electrical Equipment

    During a failure chain reaction in electrical equipment, a rapid, self-sustaining increase in temperature occurs, leading to a series of potentially dangerous events. In this context, failure chain reactions typically follow this course of events:

    1. Overheating of Components
      Initially, certain components—such as connectors, busbars, or insulation—overheat due to high resistance, poor connections, or fault conditions. The excessive heat begins to weaken nearby components, exacerbating the thermal buildup.
    2. Accelerated Degradation of Insulation and Materials
      As temperatures rise, the insulation materials and plastic components within the electrical equipment degrade. This degradation can lead to further arcing or short circuits, which release more energy and increase temperatures even more.
    3. Release of Flammable Gases
      When insulation materials or plastic components overheat, they can release gases as they decompose. These gases are often flammable, creating an additional hazard if they ignite.
    4. Arcing and Sparking
      The breakdown of insulation and the proximity of energized components can cause arcing or sparking between conductors. Arcing generates intense, localized heat that can further damage components and lead to rapid thermal escalation.
    5. Formation of a Self-Propagating Reaction
      As temperatures continue to rise, more materials degrade, creating a chain reaction where heat from one failing component accelerates the failure of others. This process becomes self-propagating, with each failure adding more heat to the system.
    6. Fire and Potential Explosion
      If the flammable gases and vaporized materials find an ignition source, they can ignite, leading to a fire within the electrical enclosure. In cases with high concentrations of gases or dust, an explosion may occur, posing serious hazards to nearby equipment and personnel.
    7. Smoke and Toxic Fumes
      Burning insulation, plastics, and other materials release toxic fumes, such as carbon monoxide and hydrogen chloride, which can spread through the facility. These fumes are hazardous to personnel and can trigger alarms or other safety systems, further disrupting operations.
    8. Loss of Electrical Functionality
      As components fail, the electrical equipment’s ability to control and distribute electricity is compromised. This can lead to an interruption of power to critical systems, potential grid instability, or further cascading failures in connected equipment.

    The UltraSense Power Generation Solution

    The key to preventing a failure chain reaction in electrical equipment is immediate detection of problems that allows operators time to take corrective action. UltraSense’s suite of sensors provide operators with early warning that can prevent a failure chain reaction from occurring or enables the ability to detect it at its incipient stage allowing other mitigation measures.

    Prevention

    The best way to avoid a failure chain reaction is to prevent it from happening in the first place. By monitoring the environment inside of the electrical enclosure, operators can take action to prevent conditions from developing that can lead to a failure chain reaction. With UltraSense sensors, operators can monitor:

    • Temperature
    • Humidity
    • Particulates in the air
    • Water ingress

    When electrical equipment is exposed to high temperatures, high humidity, water ingress, or excessively dusty environments, they are more prone to failure. UltraSense sensors can monitor all of these parameters, or any subset of them, providing operators with the opportunity to mitigate the issue(s) and prevent a serious incident.  

    A key component of monitoring the health of electrical equipment is monitoring it for overheating. UltraSense provides versatility in how the temperature of electrical equipment is monitored. Operators can choose traditional contact-based temperature monitoring which assesses temperature at a particular location on the equipment. Or, they use IR thermography sensors, or a combination of the two.

    IR thermography provides real-time monitoring of the equipment every two seconds, 24/7. Whereas traditional temperature sensors only provide the temperature of air around the sensor or the point where the probe attaches to equipment, IR thermography provides the temperatures of everything within its field of view.

    UltraSense’s IR thermography sensors can greatly improve the maintenance posture of electrical equipment operators by eliminating the need for manual IR-gun inspections. On switchgear, when configured properly, IR thermography can be used to detect phase imbalance by detecting temperature differences between the phases which can lead to overheating.

    Detection

    Because a failure chain reaction in electrical equipment can transpire quickly before operators can mitigate issues, UltraSense also provides sensors that can detect it at the onset.

    First, the IR thermography sensors can quickly report the rapidly increasing temperature. These sensors can be complemented with VOC/H2 (volatile organic compounds / hydrogen gas) detectors that sense the gases produced by the degradation of insulation and other plastic components. Lastly, an UltraSense smoke detector can also be installed inside of the enclosure.

    Early detection of failure chain reaction conditions allows operators to take decisive actions such as isolating the equipment and activating emergency shutdowns or cooling systems.

    UltraSense Sensor Features

    UltraSense sensors are ruggedly built and are U.L. listed. The plug-and-play units can be used as standalone sensors or daisy chained for broad coverage.

    The IR thermography sensors are available depending on the field of view desired, i.e., extra small, small, medium, and large. Each sensor can be divided into four different logical temperature sensors, allowing the monitoring of different aspects of the electrical equipment within its field of view.

    The UltraSense VOC and VOC/H2 detectors are calibration free and have a service life of up to 10 years or more, depending on the model chosen. Sensors are available that monitor VOC/H2, temperature, and humidity from a single unit.

    Users of UltraSense sensors have a choice of how they receive data from the units. Data can be accessed over an internet connection or using open protocols and business management / network systems via one of these options:

    • SNMP (Simple Network Management Protocol): A method often used in networking to retrieve data from devices.
    • Modbus TCP: Another common protocol that allows data exchange over IP networks, typically used in industrial settings.
    • MQTT (Message Queuing Telemetry Transport): A protocol designed for IoT (Internet of Things) that enables the sensor to send data directly to an IoT cloud service.

    UltraSense sensors can help operators comply with NFPA 70B, Standard for Electrical Equipment Maintenance, which requires both continuous thermal monitoring and operating environment monitoring for electrical equipment.

    The Stat-X® Fire Suppression Solution

    A failure chain reaction in electrical equipment does not follow a set timeframe. It can occur in minutes or may take hours. This means there will not necessarily always be time to take action if an UltraSense sensor detects a problem such as overheating or off-gassing.

    To ensure the best safety posture for electrical installations, operators should always plan for the worst-case scenario—a fire or explosion in the enclosure. Stat-X aerosol fire suppression is tested and proven to be highly effective in electrical equipment fires.

    Stat-X units can be activated by a fire detection system or thermally activated when exposed to a preset temperature. Once activated, the condensed aerosol fills the space, suppressing the fire. Further, it remains suspended for several minutes providing reflash protection.

    Stat-X has zero ozone-depletion potential, zero global-warming potential, and zero atmospheric life. This means that users can be certain that they will never be faced with costly system replacement issues which are becoming increasingly common with other fire suppression agents.

    Conclusion

    While most electrical equipment operates without incident during its lifecycle, there are those that do experience a failure chain reaction which leads to fires and explosions. Fireaway, with its line of UltraSense sensors and Stat-X fire suppression systems, offers a complete protection package that provides the highest level of safety available from any single supplier.

    Contact Fireaway  for more information on how you can provide the best level of protection for your electrical installations.

  • UltraSense™ for Clean Energy Detection System for Battery Energy Storage Systems

    UltraSense™ for Clean Energy Detection System for Battery Energy Storage Systems

    Overview

    Lithium-ion battery energy storage systems (BESS) are increasingly being adopted by renewable energy operators for the storage of excess power produced during periods of low power consumption. The stored power is kept available and can be transferred onto the grid when power demand warrants its use.

    This concept is being deployed on a global scale, and for the most part, works well and without incident. But as more and more BESS are integrated into renewable energy systems, the risks posed by lithium-ion BESS are also becoming increasingly apparent. Since 2018, the Electric Power Research Institute has documented 72 grid-scale lithium-ion BESS failure incidents globally.

    When a lithium-ion BESS experiences a failure, the results are often dramatic, resulting in a large fire that is difficult to extinguish. These incidents have produced explosive environments inside of BESS containers, at least one of which caused injuries to the first responders when they opened the enclosure. As is often the case, the BESS operator is unaware of the battery failure until the incident has reached catastrophic conditions.

    Fireaway is now offering a total fire protection solution for BESS operators through their new line of UltraSense™ sensors. Fireaway produces Stat-X®, a condensed aerosol fire suppression agent that is proven effective on lithium-ion BESS fire incidents. When UltraSense sensors are paired with the Stat-X fire suppression system, Fireaway offers operators a complete protection package that includes prevention, detection, and suppression.

    Lithium-Ion Battery Failure

    Before delving into the protection features provided by UltraSense sensors, it is important to understand how lithium-ion batteries fail. Lithium-ion batteries fail in four basic stages:

    Stage 1: Anomaly Detection/Prevention

    This initial stage is triggered by factors such as:

    • Exposure to high temperatures
    • Exposure to high humidity
    • Exposure to excessively dusty environments
    • Overcharging
    • Physical damage
    • Internal short circuits

    These conditions cause internal heating and increase the battery’s temperature, which can begin to stress the electrolyte and electrodes.

    Stage 2: Off-Gassing

    As the temperature rises, the electrolyte (usually an organic solvent) starts to decompose, releasing volatile organic compounds (VOCs) such as hydrogen, methane, and ethylene.

    Then, as pressure builds up inside the battery, it swells and increases the risk of venting or rupture.

    Step 3: Thermal Runaway

    If temperatures exceed a critical threshold (typically around 120-150°C or 248-302°F, depending on the battery chemistry), a self-sustaining exothermic reaction, known as “thermal runaway,” can begin.

    During thermal runaway, the reaction within the cell generates even more heat, accelerating the decomposition of the electrolyte and releasing more flammable gases.

    Stage 4: Propagation to Neighboring Cells (if in a pack)

    In battery packs, the failure of a single cell can produce intense heat and flames that ignite adjacent cells, causing a cascading effect.

    This propagation can escalate into a large-scale failure leading to an intense fire and possible explosion, especially if there are no cooling, containment, or fire suppression measures to stop the spread.

    The UltraSense Solution

    The key to preventing the catastrophic failure of a BESS is early detection of anomalies occurring within the battery. UltraSense’s suite of sensors provides BESS operators with early warning at each of the first three stages of lithium-ion battery failure.

    Stage 1: Anomaly Detection/Prevention

    The best way to avoid BESS failure is to prevent it from happening in the first place. By monitoring the environment inside of the BESS, operators can take action to prevent conditions from developing that can lead to battery failure. With UltraSense sensors, operators can monitor:

    • Temperature
    • Humidity
    • Particulates in the air

    When lithium-ion batteries are exposed to high temperatures, high humidity, or excessively dusty environments, they are more prone to failure. UltraSense sensors can monitor all three, or any subset of the three, providing operators with the opportunity to mitigate the issue and prevent a serious incident.

    Stage 2: Off-Gassing

    When a lithium-ion battery begins to fail, the first detectable event is off-gassing of the volatile electrolyte inside of the battery casing. The UltraSense VOC gas sensor provides the earliest detection of a battery failure, allowing operators to take immediate and decisive actions such as:

    • Initiating a controlled shutdown
    • Activating cooling systems
    • Ventilating the BESS container

    Stage 3: Thermal Runaway

    As the battery enters thermal runaway, it produces larger and larger amounts of VOCs and hydrogen gas. Hydrogen gas is produced particularly in BESS with liquid cooling systems. Its detection is a significant indicator that a thermal runaway is or is about to occur. UltraSense offers two different VOC/H2 detectors which provide quick detection of these gases, again allowing operators the opportunity to take action such as isolating the failing battery from the energy supply.

    UltraSense Sensor Features

    UltraSense sensors are ruggedly built and are UL listed. The plug-and-play units can be used as standalone sensors or daisy chained for broad coverage. The UltraSense VOC and VOC/H2 detectors are calibration free and have a service life of up to ten years or more, depending on the model chosen. Sensors are available that monitor VOC/H2, temperature, and humidity from a single unit.

    Users of UltraSense sensors have a choice of how they receive data from the units. Data can be accessed over an internet connection or using open protocols and business management / network systems via one of these options:

    • SNMP (Simple Network Management Protocol): A method often used in networking to retrieve data from devices.
    • Modbus TCP: Another common protocol that allows data exchange over IP networks, typically used in industrial settings.
    • MQTT (Message Queuing Telemetry Transport): A protocol designed for IoT (Internet of Things) that enables the sensor to send data directly to an IoT cloud service.

    UltraSense sensors can help BESS operators comply with the following NFPA requirements:

    • NFPA 855: Standard for ESS and Lithium-Ion Battery Storage Safety
    • NFPA 72: National Fire Alarm & Signaling Code
    • NFPA 69: Explosion Prevention Systems

    The Stat-X Solution

    Battery failure leading to thermal runaway does not follow a set timeframe. It can occur in as little as two minutes, or, it can take hours or even days to transpire. This means there will not necessarily always be time to take action if a Stage 2 or 3 UltraSense sensor detects a problem such as off gassing.

    To ensure the best safety posture for BESS applications, operators should always plan for the worst-case scenario—a fire in the container. Stat-X is tested and proven to be highly effective in lithium-ion battery installations.

    Stat-X units can be activated by a fire detection system or thermally activated when exposed to a preset temperature. Once activated, the condensed aerosol fills the container, suppressing the fire. Further, it remains suspended for several minutes providing reflash protection.

    Stat-X has zero ozone-depletion potential, zero global-warming potential, and zero atmospheric life. This means that users can be certain that they will never be faced with costly system replacement issues which are becoming increasingly common with other fire suppression agents.

    Conclusion

    While most BESS operate without incident during their lifecycle, there are those that do experience catastrophic battery failure leading to fires and explosions. Fireaway, with its line of UltraSense sensors and Stat-X fire suppression systems, offers a complete protection package which provides a high level of safety from a single supplier.

    Contact Fireaway  for more information on how you can provide the best level of protection for your BESS installation.